The MOJO HD5 is available by SPECIAL ORDER ONLY. We are now accepting orders for February 2021 delivery. Please call the shop for details.
Enduro World Series tested and team-approved, the HD5 lives for ragged descents combined with real-world climbs requiring efficiency, positioning and poise. Which it delivers in spades. It’s the ultimate 27.5” brawler, living to ride as hard up as down with 153mm of dw-link controlled travel and a 170mm fork. 76 degrees of climbing we'd like you to meet 64 degrees of descending.
Since 2005, we’ve partnered with suspension guru Dave Weagle on the dw-link suspension platform. It provides an unparalleled combination of climbing efficiency and downhill performance, that has been proven repeatedly at the highest levels of racing.
Our custom tuned front and rear suspension feature extra light high speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through terrain like a trophy truck storming through a set of whoops. To learn more about our Traction Tune philosophy, click here.
LIGHTWEIGHT PREMIUM CARBON, FOR EVERYONE
Whether you order an XTR or NX kit, you’ll get the same premium carbon fiber frame. All our bikes are built from the highest-grade materials and optimized for the best strength, weight, stiffness, and ride performance.
PICK YOUR SIZE
We use names like small, medium, and large to describe our sizing because it’s easy to understand, but our ultra-low standovers and clearance for long droppers give you the ability to size based on reach.
LONG DROPPER POST
What’s better than a dropper post? A longer one. Our frames are designed to accommodate the longest dropper posts possible. Riders over 5’8 (or 173cm) can easily run a 185mm dropper post, while folks between 5’ and 5’8 (152cm — 172cm) can use a post 125mm or longer depending on inseam length.
Reduced-offset forks give the front wheel greater stability at speed and an additional sense of steadiness at slow speeds too. Since the HD5 is designed to excel in technical, demanding terrain, we went with a reduced offset fork that gives that extra bit of confidence and control in the most challenging situations.
2.6” TIRE CLEARANCE
We pioneered the wide rim revolution a few years ago and inspired a new crop of wider 2.4” — 2.6” tires. When paired together, this combo can be run at ultra-low pressures that produce elbow-dragging cornering traction without sacrificing speed.
INTERNAL CABLE TUNNELS
Internal cable routing used to be a pain but our internal tubes make routing easy. Just pop the housing through and it comes out the other end, no need for swear words or a pickset. It’s clean and easy. As it should be.
It’s all about the little details. To keep your bike looking and performing at its best, we’ve fortified the upper pivot with a steel guard and added a plastic fender about the lower link. The HD5 also ships with a polycarbonate downtube protector and molded rubber swing arm protectors.
REMOVABLE ISCG05 MOUNT
There if you want it, removable if you don’t.
Ibis MOJO HD5 DEORE
COMPONENT STANDARD COMPONENT Fork DVO Onyx D1 | 15QRx110 - 170 (27.5") Shock Fox Float Performance Series, DPX2 with EVOL, 7.875 x 2.25 Or UPGRADE to a Fox Float Factory Series, X2 with EVOL, 7.875 x 2.25 Wheels Ibis S35 Aluminum / 29" / Ibis Hubs Or UPGRADE to Ibis S35 Carbon Rims / 27.5" / Ibis Logo Hubs Or UPGRADE to Ibis S38 Carbon Rims / 27.5" / Ibis Logo Hubs Or UPGRADE to Ibis S35 Carbon Rims / 27.5" / Industry 9 Hydra Hubs Or UPGRADE to Ibis S28 Carbon Rims / 27.5" / Industry 9 Hydra Hubs Tires Maxxis Assegai EXO + WT 27.5" x 2.5"Or UPGRADE to a Schwalbe Hans Dampf (front) Nobby Nic (rear) 27.5 x 2.6 Addix Speedgrip Apex TL-Easy Brakes Shimano Deore M6100 4 Piston Brake Rotors Shimano SM-RT66 200/180 Cranks Shimano Deore M6100 170 or 175mm, 24mm spindle, 32t Alloy Ring Bottom Bracket Shimano SM BB52 Rear Derailleur Shimano Deore M6100 Shadow Plus Shift Levers Shimano Deore M6100 Cassette Shimano Deore M6100 10-51 Chain Shimano Deore M6100 Headset Cane Creek 40 ZS44/ZS56 Grips Lizard Skins Charger Evo Handlebar Ibis 780mm Aluminum Handlebar, 4 x 9 degree bend, 20mm rise, 250g Stem Ibis 31.8mm (40, 50, 60, 70, 80, 90mm) Seatpost KS Rage-i Dropper (125 or 150mm) Or UPGRADE to a Bike Yoke Revive Dropper (125, 160 or 185mm). Note there is a 250lb rider weight limit on this post. Saddle WTB Silverado 142mm
Images may not show actual build kit content. Pricing and specifications subject to change without notice. All prices are ex‐works Santa Cruz, CA. MSRP prices are US suggested retail prices and are exclusive of HST.